Fiat 500 Custom Diecast Model, Handbuilt From Your Photos

Few cars carry as much personality per square inch as the Fiat 500. Whether it is a cheeky Cinquecento used for the school run, a Dolcevita in Gelato White, or a properly angry Abarth 695 Biposto with the dog-leg gearbox, this is a car people name, dress and adore. A Fiat 500 custom diecast model is the natural way to keep that character on a shelf, in exactly the spec you actually drive.

At Roys Diecast we build each replica one at a time from your own photographs. Composite body over a metal alloy chassis, opening bonnet with the little 1.4 T-Jet or 1.2 petrol bay detailed down to the oil filter and coolant lines, opening boot, rotating wheels with matched hub, caliper and disc, and an interior finished down to the gear knob, seat stitching and steering wheel boss. The paint is mixed to your car's exact factory colour, not a generic red or white.

Variants and generations we build

The 500 family covers a lot of ground for such a small car, and we build the lot. From the friendly, round-eyed 2007 launch cars right through to the current facelift, plus every hot version Abarth has thrown at the platform.

  • Fiat 500 1.2, 0.9 TwinAir and 1.4 in Pop, Lounge, Sport, Star and Rockstar trims
  • Fiat 500C with the folding fabric roof, in body colour or contrasting hood
  • 500 by Gucci, Riva, Anniversario, Collezione and Dolcevita special editions
  • Abarth 500 esseesse, 595 Turismo, 595 Competizione and 595 Pista
  • Abarth 695 Tributo Ferrari, 695 Biposto, 695 Rivale and 695 70th Anniversario
  • Abarth 500e and the new all-electric 500e in Mineral Grey or Ocean Green

If your car has been modified, that is fine and often the point. Koni coilovers poking through the arches, a Record Monza exhaust, Scorpione badges, a wrap, a roof decal, aftermarket 17-inch Supersport alloys - send the photos and we will build what is actually parked outside.

Factory colours and spec detail

The 500 has one of the best factory palettes on any modern city car, and colour match is where a Fiat 500 custom diecast model either sings or falls flat. We regularly mix Bossa Nova White, Passione Red, Epic Blue, Pompei Grey, Gelato White, Smooth Mint, Sicilia Orange, Cordoba Blue and the flat matte Abarth greys. On the hot cars we detail the red Brembo four-pot calipers behind the alloys, the tricolour side stripe, the scorpion badges front and rear, and the twin central exhaust on the Competizione.

Interior work matters just as much. Sabelt buckets with the yellow harness slots, the Alcantara flat-bottom wheel, the boost gauge on top of the dash, the turned aluminium plaque on a Biposto - all of it gets replicated at the scale you choose.

Why owners commission a 500 replica

The reasons cluster. It is very often a first car, a 21st birthday present or a graduation 500 that a family wants to keep on the shelf long after the real one has been part-exchanged. For Abarth owners it is usually the opposite - a car they have owned for years, tracked at the Nürburgring or Imola, and want immortalised with the exact wheel and sticker set they run today. A surprising number are commissioned as retirement gifts, or as a memento of a partner's much-loved Cinquecento.

Whichever it is, the point of a handmade piece is that it is your car, not a generic model from a gift shop.

Scales, pricing and delivery

Choose the scale that suits your shelf. The 1:24 sits nicely on a desk from EUR 58, the 1:18 is our most popular display size from EUR 139, and the 1:12 is a proper statement piece with the fullest engine-bay and interior detail, from EUR 139. Production takes 7-10 business days from the moment we start your build, then it goes out by tracked courier to Germany, Spain, France, Italy, the Netherlands, Belgium, Portugal, Austria or Switzerland. EU prices are displayed in EUR automatically at checkout.

Ready to spec yours? Head to the order page, upload a handful of clear photos of the car (front three-quarter, rear three-quarter, both sides, interior and wheel close-up is ideal) and pick your scale. You can pay by card or bank reference. If you would like to see what previous customers have received first, our verified customer reviews currently sit at 4.9/5 across 50 orders and ten European countries.

When you are happy, start your Fiat 500 custom diecast model build here: diecastroys.com/order.

Frequently asked questions

Can you build both the classic-shape 2007-2015 Fiat 500 and the current facelift?
Yes. We build every generation of the modern 500 from the 2007 launch car through the 2015 facelift with the new lights and dashboard, right up to the current model and the all-electric 500e. Just tell us the year and trim, or let the photos speak for themselves.
Will you match my exact factory paint, including tri-coats like Bossa Nova White?
Yes. Paint is mixed to your car's specific factory code, whether that is a solid Passione Red, a pearl like Bossa Nova White, or one of the flatter Abarth greys. If you have refinished the car in a non-standard colour, send a clear daylight photo and we will match to that instead.
Can you replicate the Abarth 595 Competizione's Sabelt seats and Brembo calipers?
Yes. On the 1:18 and 1:12 scales in particular we detail the Sabelt buckets with the correct harness cut-outs, the red four-pot Brembo calipers behind the alloys, the Record Monza exhaust and the scorpion badging front, side and rear.
I have fitted aftermarket wheels and a wrap. Will you build it as it is now, not as it left the factory?
That is exactly the point of a handmade piece. Send photos showing the current wheels, ride height, wrap and any decals, and we will build the car as it sits on your drive today, not a catalogue version.
Which scale should I pick for a Fiat 500?
The 500 is a small car, so the 1:24 from EUR 58 works well on a desk or bookshelf, the 1:18 from EUR 139 is the sweet spot for showing off the interior and wheel detail, and the 1:12 from EUR 139 is the choice if you want the fullest engine-bay and stitching detail on a hot Abarth.
Can you build a 500C with the roof shown open?
Yes. For the 500C and 595C we can build the model with the folding fabric roof either closed, half-retracted or fully stacked at the rear, and match the hood colour to your car - body-colour, black or ivory.
How long will my Fiat 500 replica take to arrive?
Production takes 7-10 business days from the point we start your build, then the model ships by tracked courier. Delivery times vary by country within our shipping list, but most Western European orders arrive within a fortnight of the build starting.
Do you ship an Abarth 695 to Italy or Germany, and in euros?
Yes. We ship to Italy, Germany, Spain, France, the Netherlands, Belgium, Portugal, Austria and Switzerland, and prices convert automatically from EUR to EUR at checkout for EU visitors.
Hemen sipariş verin Read owner reviews
Para iade garantisi Üretim başlamadan iptal ederseniz tam iade. Model siparişinize uymuyorsa yeniden işleriz veya ücretinizi iade ederiz.
El yapımı, tek adet Her model kendi fotoğrafından, tezgahta tek tek işlenir — stok yok.
Takipli dünya genelinde kargo Kapıya 7–10 iş günü içinde, takip numarasıyla gönderim.